SAAB TIS2000 DOWNLOAD HOW TO
SAAB TIS2000 DOWNLOAD SOFTWARE

Confirm VIN or, if necessary, enter correct VIN, then select РІР‚ВNextРІР‚в„ў.Connect Tech 2 to the pc, switch it on, and click on РІР‚ВNextРІР‚в„ў on the pc.Follow the instructions on the Tech 2.Р’В Then press РІР‚СљExitРІР‚Сњ on the Tech 2, switch it off and disconnect it from the vehicle.

SAAB TIS2000 DOWNLOAD HOW TO

During the Request Info the Tech 2 receives information from the selected device.Р’В If the ECU was replaced a РІР‚СљRequest InfoРІР‚Сњ has to be performed for the NEW unit.Р’В Since the new ECU is not programmed on delivery, the retrieved information is not complete.Р’В For that reason, TIS 2000 gives instructions as how to enter the missing vehicle data.

Note: Depending on the model year and the selected model either a reprogramming of the ECU (F0: Engine) or of the TCM (F1: Transmission) can be selected.

For the selection of РІР‚СљNextРІР‚Сњ the vehicle has to be identified as requested by Tech 2.

If Tech 2 has already stored vehicle data they will be displayed now.Р’В In that case, Tech 2 asks you to either use the current data (hold data) or request further information from the ECU (continue).

Select РІР‚СљF1: Service Programming System (SPS)РІР‚Сњ in the main menu.

Turn ignition to ON without start the engine!!!.

Connect Tech 2 scanner to vehicle.Р’В Power on device РІР‚вЂњ РІР‚СљTech 2РІР‚Сњ is displayed on the screen, then press РІР‚СљENTERРІР‚Сњ.

On РІР‚ВSelect Diagnostic Tool and Programming ProcessРІР‚в„ў (picture below) screen make the desired selection forР”Сћ) the reprogramming of an ECU that was not exchanged or the replacement/programming of a new ECU

Select the application РІР‚ВService Programming SystemРІР‚в„ў on the TIS 2000 start page.Р”В¤.

To register the hardware key select РІР‚ВHardware Key RegistrationРІР‚в„ў in the menu РІР‚ВConfigurationРІР‚в„ў.

Hardware keys that have already been registered are still valid! Note: The hardware key (HWK) has to be registered prior to working with РІР‚ВService Programming SystemРІР‚в„ў.Р’В To register a hardware key, the form that is enclosed with the hardware key kit has to be filled in and sent to the address at the top.Р’В In case the form is missing, the document is also in the TIS 2000 newsletter (see icon in the TIS 2000 tool bar).Р’В At first, the user receives a temporary code until the key is registered on the next TIS 2000 CD. If you need to program Saab ECU, you had to use Saab TIS2000 and USB dongle.

SAAB TIS2000 DOWNLOAD SOFTWARE

TIS2000 will not work on 2007 up GM, and software must work together with TIS2000 USB key.

Here is the step-by-step instruction on programming GM (General Motors) ECUs with Tech2 scanner and SPS (Service Programming System) application in TIS2000.Р”В«efore using the SPS, make sure that the Tech 2 scan tool and the pc contain the latest software, the battery of the vehicle is fully charged, only the ignition is on power, and all cables are connected properly.

Saab tis2000 download